If you are like most home machinists, two things scare you. Learning to use a fly cutter and trying make precision cuts. Experienced machinists know that precision requires control. Many hobby machinists aren't confident when it comes to control. But, control isn't a problem if start with a quality, ultra precision arbor
and saw blade. See, using an ultra precision saw is nothing more just making small, precise cuts. Doesn't matter what material you are cutting. It could be wood or metal. But small cuts require precision. Precision means you've got to get up close and person with the work area.
Hacks for Precision Cuts
Now that you know what makes a precision cut, let’s get sawing. Use these hacks to ace precision cuts:
- Watch your speeds. It's better to use less speed when you need precision. Just because that blade looks like a circular saw blade doesn’t mean it cuts like one. So, for precision slits and cuts, get in close and run slow. Keep the feed rate low as well.
- Use plenty of lubricant or air to keep the area clean. This isn't the time to be stingy with lubricant. Flood the workarea if you must.
- Make sure to remove all swarf after every pass. It's important to keep the cut clean.
- Make sure you always cut in the same direction.
Use an Ultra Precision Arbor
All saw arbors are supposed to keep the saw blade in place. But ultra precision cutting requires extraordinary rigidity. It also requires you to get the blade as close to the work as possible. Most saw arbors are held in place with a cap. This cap can be a problem if a vise is holding the workpiece. If the clamping screw runs afoul of the vise the result is disaster. Ruined work. But the ultra precision arbor sold by The Tool Company
solves that problem. It gets a low profile from its deep cap. As a result, you can get the blade closer to the work area than with a standard arbor.
Buy the Best Ultra Precision Arbor
The best ultra precision arbor is found at The Tool Company. This arbor does more than just get you close to the workpiece. Proximity is just the start. Additional benefits are:
- Superior vibration absorption
- Durable Weldon shank
- Extra Long Reach
- 5 Year Warranty
It's also homegrown. That's right. The best ultra precision arbor is made in the USA. Order a set of three ultra precision arbors
or just buy an individual arbor. Either way, you'll cut with precision when you cut with an ultra precision arbor.